Environmental & Waste Treatment
Turn oily sludge, slop oil and contaminated soil from a disposal liability into a managed, measured process.
- Sludge treatment skids
- Decanter centrifuges
- Thermal desorption
Proven solutions. Sourced globally. Delivered locally.
Mazoon Engineering Solutions sources, qualifies and commissions treatment technology, chemistry and equipment for oil and gas operators, then trains your people to run it.
- Baseline before we begin
- Trial before you commit
- Your team trained to run it
- Oily sludge treatment skids
- Decanter centrifuges
- Thermal desorption units
- Flare gas recovery units
- Vapour recovery units
- Emulsion breakers
- Scale removal and inhibition
- Filter cake breakers
- Shale shakers
- Mud coolers
- Pumps and screw conveyors
- Tank cleaning systems
What we bring to Oman
Four solution lines. One accountable partner.
We source from qualified international manufacturers, prove the technology on your site, and stay until your team owns it.
Flare Gas Solutions
Measure what you flare, then recover it: compress, condition and put associated gas back to work as fuel.
- Flare gas recovery
- Vapour recovery
- Gas flow metering
Chemical Solutions
Treatment programmes screened in the lab and trialled on your own fluids before you commit to a drum.
- Filter cake breakers
- Scale control
- Pipeline cleaning
- Sludge treatment
Engineering Equipment Supply
Solids control and process equipment, specified for your service and supported after delivery.
- Shakers and mud coolers
- Pumps and conveyors
- Skid packages
Why operators choose Mazoon
Performance you can verify. Know-how that stays.
Performance
Targets are agreed before work starts and checked against your own baseline: treatment efficiency, recovered volumes, uptime.
Innovation
We bring technology and chemistry proven elsewhere and prove it here, on your site, in your conditions.
Know-how transfer
Training, procedures and staged handover, so your people can run, maintain and improve what we introduce.
From source to ownership
Every project follows the same four steps
01
Source
We identify proven equipment and chemistry from qualified international manufacturers.
02
Qualify
Bench tests, site trials and reference checks against your own baseline.
03
Commission
Installation supervision, start-up and performance verification on site.
04
Transfer
Operator training, procedures and support until your team owns the result.
Start a conversation
A waste stream, a flare or a fluid to fix?
Tell us what it costs you today. We will propose a trial to prove what it could cost tomorrow.
Solutions
What we can source, prove and support
Four solution lines, each selected by test and supported by engineers who stay through commissioning and handover.
Solution line 1
Environmental & Waste Treatment
Technology to treat oily sludge, slop oil, drilling waste and contaminated soil, recovering oil, cleaning water and minimising what goes to disposal.
What we can source
- Oily sludge treatment skids
- Decanter centrifuges
- Thermal desorption units
- Oil-water separators and skimmers
- Tank cleaning systems
- Soil washing plants
- Measured by
- Residual oil in treated solids, waste volume reduction, oil recovered
- Applications
- Tank bottoms, refinery sludge, produced-water solids, drill cuttings
Solution line 2
Flare Gas Solutions
Measure what you flare, then recover it. We help you compress, condition and reuse associated gas as fuel or feed instead of burning the value.
What we can source
- Flare gas recovery units
- Vapour recovery units
- Liquid-ring and screw compressors
- Flare gas flow meters
- Flare tips and ignition systems
- Gas conditioning skids
- Measured by
- Flared volume, gas recovered, emissions avoided
- Applications
- Production stations, gathering systems, storage and loading facilities
Solution line 3
Chemical Solutions
Chemistry chosen by test, not by catalogue. Programmes are screened in the lab and trialled on your fluids before you commit.
What we can source
- Filter cake breakers and stimulation
- Frac flowback aids
- Pipeline cleaning and wax treatment
- Black powder and H₂S scavengers
- Emulsion breakers
- Scale removal and inhibition
- Wellbore and casing cleaning
- Oily sludge and slop treatment
- Drilling waste and pit cleaning
- Remediation chemistry
- Measured by
- Treatment efficiency, dosage rate, cost per treated volume
- Applications
- Well stimulation, pipelines, crude and slop treatment, oily sludge, drilling waste, contaminated soil
Solution line 4
Engineering Equipment Supply
Solids control and process equipment from qualified manufacturers, technically evaluated, inspected before shipment and supported after delivery.
What we can source
- Shale shakers and mud cleaners
- Mud coolers and heat exchangers
- Pumps and screw conveyors
- Tanks, vessels and skid packages
- Spares and consumables
- Measured by
- Availability, delivery lead time, compliance with specification
- Applications
- Drilling and workover, production facilities, treatment plants, terminals
Included with every solution
Engineering support, not just a delivery note
Selection studies
Feasibility work and technical comparison, so the right option is chosen before money is committed.
Inspection and expediting
Factory acceptance, inspection and shipment follow-up against the agreed specification.
Commissioning
Installation supervision, start-up and performance verification on your site.
Training and after-sales
Operator training, O&M procedures, spares planning and technical support after handover.
Why Mazoon
Confidence, engineered
Every claim we make can be checked against your own numbers, and every project is designed to leave capability in Oman.
Performance
Baseline, trial, verify, scale
We measure your current performance first, then prove ours against it, in your units, on your site.
Step 1
Baseline
Record today’s figures: what is treated, flared, consumed or lost, and at what cost.
Step 2
Trial
Run a bounded bench or site trial with pass criteria agreed in writing beforehand.
Step 3
Verify
Compare results with the baseline using your data and, where needed, independent laboratory analysis.
Step 4
Scale
Roll out with a monitoring plan so performance is tracked for as long as the solution runs.
| Solution line | What we measure | Evidence delivered |
|---|---|---|
| Environmental & waste |
| Batch records and laboratory results |
| Flare gas |
| Monthly flare and recovery balance |
| Chemicals |
| Trial report with before and after results |
| Equipment |
| Inspection and delivery records |
Innovation
How we choose what we source
We only put our name to what we would be prepared to run ourselves. Every supplier and product is judged against five tests.
Field-proven references
Installed and operating in comparable conditions, with references we can check.
Independent test data
Performance shown by laboratory and field results, not brochure claims.
Local serviceability
Spares, consumables and technical support that can reach Oman quickly.
HSE and standards
Compliance with the codes and safety requirements your site applies.
Total cost of ownership
Judged over the life of the equipment, not on the purchase price alone.
Know-how transfer
From supported operation to local ownership
The goal of every project is a local team that understands the technology well enough to run it, maintain it and improve it.
Handover is not an event at the end of the project. It is planned from the first day, with competency sign-off at each stage so responsibility moves only when your people are ready to carry it.
The table shows who leads each activity as the project moves from Introduce to Co-operate to Hand over.
| Activity | Stage 1 · Introduce | Stage 2 · Co-operate | Stage 3 · Hand over |
|---|---|---|---|
| Daily operation | Mazoon leads | Joint | Your team leads |
| Sampling and monitoring | Mazoon leads | Joint | Your team leads |
| Maintenance | Mazoon leads | Joint | Your team leads |
| Performance reporting | Mazoon leads | Mazoon leads | Joint |
| Optimisation and troubleshooting | Mazoon leads | Mazoon leads | Joint |
Mazoon leadsJointYour team leads
Training and competency
Classroom and on-the-job training, with assessed competency rather than attendance certificates.
Procedures and documentation
Operating and maintenance procedures adapted to your site standards, so knowledge sits in the system.
Engineer-to-engineer support
Direct access to manufacturer specialists for troubleshooting, design questions and performance reviews.
- Company
- Mazoon Engineering Solutions
- Base
- Sultanate of Oman
- Industry
- Oil & gas
- Solution lines
- Environmental treatment, flare gas, chemicals, equipment supply
- Working week
- Sunday to Thursday
About Mazoon
Mazoon Engineering Solutions is an oil and gas engineering company based in Oman. We exist to close the gap between advanced technology and the operators who need it.
Our team comes from engineering and operations backgrounds, and we apply the documentation and traceability standards of safety-critical industries to every scope, large or small.
We stay close to the work. Senior engineers review deliverables and visit site, so the person who scoped the work is accountable for its results.
Contact
Tell us about your project
A short brief is enough. Include the site, the fluid or waste stream, the timeline and anything that makes it urgent.
Your enquiry is ready
Open it in your email app, or copy the text and send it to info@mazoones.com. Nothing has been sent yet.
- info@mazoones.com
- Telephone
- +968 9299 1667
- Location
- Sultanate of Oman
- Working week
- Sunday to Thursday